Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview

Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126.

Technical Specifications & Performance Data

Main data

• Make/Model: Uniloy Milacron HSM10/D
• Year: 2000
• Technology: Extrusion Blow Molding (EBM), single parison
• Material: HDPE
• Number of cavities: 1
• Max container volume: 10 L
• Indicative output: up to about 300 bph on 10 L (application-dependent)
• Manuals: included
• Ref. no.: SO126

Extruder

• Screw diameter: 100 mm; L/D 24
• HDPE screw speed: 0–70 rpm
• Plasticizing capacity (HDPE): approx. 300 kg/h
• Main extruder motor: 89 kW
• Heating zones: 6; barrel heating power: 31.4 kW
• Motor cooling power: 0.58 kW; barrel cooling power: 1 kW

Parison head

• Type: PE 1/200, single parison
• Max die diameter: 200 mm
• Head heating power: 14.2 kW
• Parison thickness control: hydraulic (wall-thickness programming)

Clamp & blow unit

• Clamp force: 200 kN
• Max mould size: 650 × 500 mm (H)
• Mould thickness: 2 × 150 mm
• Mould opening stroke: 300 mm
• Horizontal carriage stroke: 660 mm
• Blow pin stroke: 240 ± 5 mm
• Blow pin thrust at 50 bar: 320 kg

Electrical

• Installed power: 156 kW (average consumption ~104 kW)
• Supply: 400 V, 50 Hz, 318 A, 3 + N

Hydraulic system

• Reservoir capacity: 400 l
• Pump flow (1470 rpm): 123 l/min
• Max pressure (main circuit): 190 bar
• Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW

Pneumatics

• Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min
• Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min

Cooling water

• Mould circuit: 8–12 °C; flow 15 m³/h
• Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h

Dimensions & weights

• Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm
• Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg
• Noise level at operator: < 85 dB(A)

Advanced Automation & Control Systems

• Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers.
• Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics.
• Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature.
• Interlocked guarding and emergency stops for safe operation.

Production Line Integration Capabilities

This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems:

• Conveyors, deflashing/trimming, leak testers, vision/weight control, and palletizing cells.
• Standard utilities: 400 V / 50 Hz electrical, 6–8 bar compressed air, closed-loop cooling water at specified flows.
• Suitable for beverage production auxiliaries such as water and edible-oil jerrycans, as well as chemicals and household products.

Machine Condition & Maintenance History

• Status: second-hand unit with original documentation; manuals are available for commissioning and maintenance.
• Chiller: not supplied (water circuits required as per specs). Air compressor: not included unless otherwise stated.
• Inspection and test under your product and tooling are recommended to validate cycle time and wall-thickness distribution.

Operational Performance & Versatility

• Single-parison design supports consistent production of 5–10 L containers with changeable dies up to Ø200 mm.
• HDPE processing at high plasticizing capacity (~300 kg/h) enables competitive cycle times around 300 bph on 10 L, subject to mould design, cooling, and part geometry.
• Stable temperature control and hydraulic parison programming deliver repeatable quality for demanding industrial packaging requirements.

Installation Requirements & Site Preparation

• Footprint and access: allocate at least 7.6 × 7.7 m plus service clearance...